| EPS/EHPS Steering controllers –
electronically controlled steering is gaining popularity in the market and is a
typical example of an application that can strongly benefit from Dow Corning
silicone material solutions. The pioneer and leader in silicone materials have
engineered the right range of products for the application; click below to find
the technical details or contact Dow Corning. |
 | Thermal interface - Wet
dispensed |
| Dow Corning supplies many
types of thermal interface materials such as fabricated films and pads, which
do not need to be dispensed or cured. |
| Thermal interface -
Pads and films |  |
| Dow Corning supplies many types of
thermal interface materials such as fabricated films and pads, which do not
need to be dispensed or cured. These include thin thermal pads, gap
fillers and phase change films. Fabricated films and pads are supplied ready to
use for those who prefer not to utilize curing processes. |
 | Gels |
| Gels are a special class of
encapsulants that cure to an extremely soft material. Cured gels retain
much of the stress relief and self-healing qualities of a liquid while
providing the dimensional stability of an elastomer. |
| Adhesives and
Sealants |  |
| Adhesives are used primarily to attach
components, such as module lids and baseplates, within electronic modules and
to seal openings in a module to exclude dirt, water or other contaminants. |
 | Conformal coatings |
| Conformal coatings are materials
applied in thin layers, typically a few mils or a fraction of a mm, onto
printed circuits or other electronic substrates. |
Change
