| LED headlamp controllers – LED headlamp
controllers create heat and need protection from a variety of media. This is
frequently achieved in the most reliable and durable fashion when silicone
materials are used. To obtain technical details on a very wide range of quality
material solutions please click below. |
 | Thermal interface - Wet
dispensed |
| Dow Corning supplies a
line of thermally conductive materials, including curing adhesives, gels and
encapsulants, plus non-curing compounds. The materials are supplied as liquids
and pastes that are dispensed or printed when used. |
| Thermal interface -
Pads and films |  |
| Dow Corning supplies many types of
thermal interface materials such as fabricated films and pads, which do not
need to be dispensed or cured. These include thin thermal pads, gap
fillers and phase change films. Fabricated films and pads are supplied ready to
use for those who prefer not to utilize curing processes. |
 | Gels |
| Gels are a special class of
encapsulants that cure to an extremely soft material. Cured gels retain
much of the stress relief and self-healing qualities of a liquid while
providing the dimensional stability of an elastomer. |
| Adhesives and
Sealants |  |
| Adhesives are used primarily to attach
components, such as module lids and baseplates, within electronic modules and
to seal openings in a module to exclude dirt, water or other contaminants. |
 | Conformal coatings |
| Conformal coatings are materials
applied in thin layers, typically a few mils or a fraction of a mm, onto
printed circuits or other electronic substrates. These materials provide
environmental and mechanical protection to significantly extend the life of the
components and circuitry. |
Change
