Dow Corning® sealant strip provides sealing and corrosion protection
for indoor and outdoor equipment, including connectors and electrical
components. Extensive testing has shown that Dow Corning’s gel materials
provide an effective barrier against corrosion. Even in damp environments, the
gel coats surfaces as it is applied, to form a tight environmental seal.
The sealant strip is highly conformable. Applied as recommended in
wraparound applications, the strips will accommodate the tight bends and
transitions of even complex electrical connectors. In gasketing applications,
the strip can be easily compressed to flow and fill rough gasket surfaces, even
when the application force is low and unevenly distributed.
Dow Corning® sealant strip is supplied on rolls in widths up to 20 inches
and thicknesses from 0.03 inch to 0.17 inch. Precut custom gasket shapes are
also available. Custom precut gasket shapes are available with GT product
backed with Teflon, rubber, or foam. Teflon-backed versions are typically
used as stamped pads where additional abrasion resistance to the
non-sealing surface is required. Rubber-backed versions are typically used as
stamped pads or gaskets to offer sealing between two surfaces. They can also be
used for wraparound protection. Unbacked versions are typically used for
wraparound protection and are not offered in stamped shapes.
 | | | | | | | | |
| | | | |
| | | | | | | | |
|
Dow Corning® GT-1000 Connector Seal
| |
Sealant Strips Unbacked both sides tacky
| |
Both sides tacky, forms tight environmental seal, prevents corrosion,
requires no heat or special tools to apply, allows easy inspection or
repair
| |
Sealing and corrosion protection for indoor or outdoor equipment, including
connectors and electrical components, unbacked versions are typically used for
wraparound protection and are not offered in stamped shapes
| |
| | | | | | | | |
|
Dow Corning® GT-1010 Connector Seal
| |
Sealant Strips Teflon backed one side tacky
| |
Teflon backed one side tacky, forms tight environmental seal, prevents
corrosion, requires no heat or special tools to apply, allows easy inspection
or repair
| |
Sealing and corrosion protection for indoor or outdoor equipment, including
connectors and electrical components, Teflon backed versions are typically used
as stamped pads where additional abrasion resistance to the non-sealing surface
is required
| |
| | | | | | | | |
|
Dow Corning® GT-1020 Connector Seal
| |
Sealant Strips Rubber backed one side tacky
| |
Rubber backed, one side tacky, forms tight environmental seal, prevents
corrosion, requires no heat or special tools to apply, allows easy inspection
or repair
| |
Sealing and corrosion protection for indoor or outdoor equipment, including
connectors and electrical components, Rubber backed versions are typically used
as stamped pads of gaskets to offer sealing between two surfaces. They can also
be used for wraparound protection
| |
| | | | | | | | |
|
Dow Corning® GT-1030 Connector Seal
| |
Sealant Strips Foam backed one side tacky
| |
Foam backed, one side tacky, forms tight environmental seal, prevents
corrosion, requires no heat or special tools to apply, allows easy inspection
or repair
| |
Sealing and corrosion protection for indoor or outdoor equipment, including
connectors and electrical components, foam backed versions are typically used
as stamped pads for interfacial seals between two mating surfaces to isolate
electrical contacts from moisture. They can also be used for wraparound
protection.
| |
| | | | | | | | |
|
Dow Corning® GT-1600 Connector Seal
| |
Sealant Strips Flame resistant Unbacked both sides tacky
| |
Both sides tacky, flame resistant, forms tight environmental seal, prevents
corrosion, requires no heat or special tools to apply, allows easy inspection
or repair
| |
Sealing and corrosion protection for indoor or outdoor equipment that
requires a flame resistant sealing material, including connectors and
electrical components, unbacked versions are typically used for wraparound
protection and are not offered in stamped shapes
| |
| | | | | | | | |
|
Dow Corning® GT-1610 Connector Seal
| |
Sealant Strips Flame resistant Teflon backed one side tacky
| |
Teflon backed one side tacky, flame resistant, forms tight environmental
seal, prevents corrosion, requires no heat or special tools to apply, allows
easy inspection or repair
| |
Sealing and corrosion protection for indoor or outdoor equipment that
requires a flame resistant sealing material, including connectors and
electrical components, Teflon backed versions are typically used as stamped
pads where additional abrasion resistance to the non-sealing surface is
required
| |
| | | | | | | | |
|
Dow Corning® GT-1620 Connector Seal
| |
Sealant Strips Flame resistant Rubber backed one side tacky
| |
Rubber backed, one side tacky, flame resistant, forms tight environmental
seal, prevents corrosion, requires no heat or special tools to apply, allows
easy inspection or repair
| |
Sealing and corrosion protection for indoor or outdoor equipment that
requires a flame resistant sealing material, including connectors and
electrical components, Rubber backed versions are typically used as stamped
pads of gaskets to offer sealing between two surfaces. They can also be used
for wraparound protection
| |
| | | | | | | | |
|
Dow Corning® GT-1630 Connector Seal
| |
Sealant Strips Flame resistant Foam backed one side tacky
| |
Foam backed, one side tacky, flame resistant, forms tight environmental
seal, prevents corrosion, requires no heat or special tools to apply, allows
easy inspection or repair
| |
Sealing and corrosion protection for indoor or outdoor equipment that
requires a flame resistant sealing material, including connectors and
electrical components, foam backed versions are typically used as stamped
pads for interfacial seals between two mating surfaces to isolate electrical
contacts from moisture. They can also be used for wraparound protection.
| |
| | | | | | | | |
PDF Links will download files in Adobe Acrobat PDF format. For technical
information, or to download the free Acrobat Reader, go to Acrobat help.
Change
