|
For Pin Sealing select one of Dow Corning’s Adhesive/Sealants. Here are some
items for considerations in choosing the appropriate material for your use:
-
For pin sealing flowable materials are generally preferred.
-
Heat cures offer higher throughput and faster processing times. Heat cure
times typically are shorter with increasing temperatures. If heat cure is not
practical choose a room temperature cure time that indicates a typical time to
attain full physical properties. Parts may be handleable sooner and some of
these may be mildly heat accelerable.
-
One-part materials are easier to handle, two-part materials often offer
faster processing. Two-part materials are typically 1:1 mix ratio but some are
10:1.
-
A number of these products have UL or Mil Spec approvals.
Additional Information:
Adhesive/Sealant
Product Information
Adhesives/Sealants
Tutorial
|
Change
