 | | | | | | | | | | | | | | |
| | | | | | | |
| | | | | | | | | | | | | | |
|
4 Ball Test - Wear Scar
| |
Machine for determination of wear properties of consistent lubricants
in a four ball system (rotating ball on three fixed balls).
| |
Wear scar in mm
| |
ASTM D2266
| |
Greases, Pastes, Oils
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
4 Ball Test - Weld Load
| |
Machine for determination of weld load of consistent lubricants in a
four ball system (rotating ball on three fixed balls).
| |
Weld load in N
| |
ASTM D2596
| |
Greases, Pastes, Pastes
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Falex Pin & Vee Block
| |
Test device for determination of tribological properties of a
lubricated, rotating steel shaft between two V-shaped steel blocks under
specified load.
| |
Friction coefficient µ, wear in mm, endurance life in h, load carrying
capacity N
| |
ASTM D 2670, ASTM D 2625, ASTM D 3233, ASTM D 3704
| |
Anti Friction Coatings, Oils
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
LFW-1 Oscillating Test
| |
Testing machine to investigate tribological properties of a steel flock
pressed against a lubricated oscillating ring.
| |
Static and dynamic friction coefficient µ, wear in mm, life time of
lubricant
| |
ASTM D 2714, ASTN D 2981, ASTM D 3704
| |
Greases, Pastes, Anti Friction Coatings, Oils
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
LFW 1 Rotating Test
| |
Testing machine to investigate tribological properties of a steel
block pressed against a lubricated rotating ring.
| |
Static and dynamic friction coefficient µ, wear in mm, life time of
lubricant
| |
ASTM D 2714, ASTN D 2981, ASTM D 3705
| |
Greases, Pastes, Anti Friction Coatings, Oils
| |
5 days
| |
Get
a Quote!
| |
| | | | | | | | | | | | | | |
|
LFW-4 Press Fit
| |
LFW-4 test measures the coefficient of friction as well as onset stick-slip
of sliding pin and bush under low speed condition.
| |
Friction coefficient
| |
Dow Corning Test Method
| |
Pastes
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Ball on Plate, Oscillating Test
| |
Measure coefficient of friction under various load and speed with
different kind of materials, like plastics, elastomers, metals, etc.
| |
Friction coefficient
| |
Dow Corning Test Method
| |
Greases, Pastes, Anti Friction Coatings, Oils
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Low Temperature Torque Apparatus
| |
Low temperature torque is determined by the starting torque and the running
torque of the outer bearing when 6204 ball bearing filled with grease is
rotated at 1 rpm.
| |
N-cm
| |
JIS K 2220, ASTM D 1478
| |
Greases, Pastes, Compounds
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
| | | | | | | | | | | | | | |
| | | | | | | |
| | | | | | | | | | | | | | |
|
Penetration Apparatus
| |
Penetration serves as a measure of consistency to determine the
plasticity of a wide range of materials.
| |
Cone penetration in 1/10 mm
| |
JIS K 2220, DIN 51 804 T2, ISO 2137, ASTM D 1403-69
| |
Greases, Pastes, Compounds
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Oil Bleed and Evaporation Test Assembly
| |
This test method is used to determine the tendency of lubricants to
bleed and evaporate oil at an elevated temperature. It became a useful
guide of the behavior during storage. This test method shall be conducted
at 100ºC for 24 hours unless other conditions are required by the grease
specification.
| |
Oil bleed and evaporation in weight %
| |
FTM 791-321-2, ASTM D 6184
| |
Greases, Pastes, Compounds
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Evaporation
| |
Evaporation loss is determined by the percentage of the loss (by
weight) evaporated from a lubricant which is placed in a container under the
condition that hot air is blown on its surface for 24 hours.
| |
Evaporation loss in weight %
| |
JIS K 2220
| |
Greases, Pastes, Compounds
| |
5 days
| |
Get a
Quote!
| |
| | | | | | | | | | | | | | |
|
Dropping Point Apparatus
| |
The dropping point of a lubricant is the temperature at which a grease
passes from a semi-solid to a liquid state.
| |
Dropping point temperature in °C or °F
| |
JIS K 2220, ASTM D 566, IP 132, ISO 2176, FTM 791-1421
| |
Greases, Pastes, Compounds
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Oxidation Stability
| |
This test method determines resistance of lubricating greases to oxidation
when stored statically in an oxygen atmosphere in a sealed system at an
elevated temperature.
| |
Pressure drop in bar
| |
JIS K 2220, ASTM D 942, DIN 51 808, IP 142, FTM 791-3453, FTM
791-5314
| |
Greases, Pastes, Compounds
| |
10 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Infrared-Analysis Spectrometer (IR)
| |
Infrared, or IR, spectroscopy is one type of vibrational spectroscopy,
which is a spectroscopic technique where molecular vibrations are analyzed.
This permits qualitative analysis of lubricants.
| |
IR-Spectra
| |
JIS K 0117
| |
Greases, Pastes, Compounds
| |
5 days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Plastic Compatibility Test Apparatus
| |
This test method covers determination of compatibility between
plastics and lubricants by using 1/4 oval shap apparatus.
| |
Stress %
| |
Dow Corning Test Method
| |
Greases, Pastes, Compounds, Oils
| |
5 Days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
|
Roll Stability
| |
Test method covers determination of the changes in the consistency, as
measured by cone penetration, of lubricating greases when worked in the roll
stability test apparatus.
| |
Change in Cone Penetration
| |
ASTM D 1831
| |
Greases, Pastes, Compounds
| |
5 Days
| |
Get
a Quote!
| |
| | | | | | | | | | | | | | |
|
Cleveland Open Cup
| |
Determination of Flash Point of lubricating oils.
| |
Degrees C
| |
JIS K2265
| |
Oils
| |
5 Days
| |
Get a Quote!
| |
| | | | | | | | | | | | | | |
