 | | | | | | | | | | | | |
| | | | | | |
| | | | | | | | | | | | |
|
FAG - FE 9 Machine
| |
Test apparatus to determine the life of lubricating greases in
rolling-element bearings under specific temperature, rotational speed and axial
load.
| |
Lifetime of bearings in h
| |
DIN 51821
| |
Greases, Pastes
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
High Temperature Screw Test
| |
Electronic torque-wrench equipment to test the torques of lubricated,
thermal pretreated standard M 12 - 1.7709 bolts.
| |
Breakaway torque in Nm
| |
Not Applicable
| |
Pastes
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
LFW 1 Oscillating Test
| |
Testing machine to investigate tribological properties of a steel
block pressed against a lubricated oscillating ring.
| |
Static and dynamic friction coefficient µ, wear in mm, life time of
lubricant
| |
ASTM D 2714, ASTN D 2981, ASTM D 3704
| |
Greases, Pastes, Anti Friction Coatings, Oils
| |
Get a
Quote!
| |
| | | | | | | | | | | | |
|
LFW 1 Rotating Test
| |
Testing machine to investigate tribological properties of a steel
block pressed against a lubricated rotating ring.
| |
Static and dynamic friction coefficient µ, wear in mm, life time of
lubricant
| |
ASTM D 2714, ASTN D 2981, ASTM D 3705
| |
Greases, Pastes, Anti Friction Coatings, Oils
| |
Get a
Quote!
| |
| | | | | | | | | | | | |
|
Low Noise Tester
| |
Computer aided test device to determine the noise of grease lubricated
bearings by vibration pickup.
| |
Noise level
| |
Not Applicable
| |
Greases
| |
Get
a Quote!
| |
| | | | | | | | | | | | |
|
Falex Pin & Vee Block Tester
| |
Test device for determination of tribological properties of a
lubricated, rotating steel shaft between two V-shaped steel blocks under
specified load.
| |
Friction coefficient µ, wear in mm, endurance life in h, load carrying
capacity N
| |
ASTM D 2670, ASTM D 2625, ASTM D 3233, ASTM D 3704
| |
Anti Friction Coatings, Oils
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Screw Tester
| |
Electronic test device to determine tribological properties of lubricants at
bolted connections (bolt, washer nut).
| |
Coefficient of friction µ on head and thread
| |
DIN 946
| |
Pastes, Anti Friction Coatings, Oils
| |
Get a
Quote!
| |
| | | | | | | | | | | | |
|
SKF Emcor Tester
| |
Test device for testing the corrosion preventing properties of
lubricants.
| |
Degree of corrosion
| |
DIN 51802
| |
Pastes, Greases
| |
Get
a Quote!
| |
| | | | | | | | | | | | |
|
SRV Tester
| |
A multifunctional test system to measure friction and wear under oscillatory
or rotational motion.
| |
Coefficient of friction µ, wear rate in mm
| |
DIN 51834, ASTM D 5706-7, DIN 50324
| |
Greases , Pastes, Anti Friction Coatings, Oils
| |
Get a
Quote!
| |
| | | | | | | | | | | | |
|
VKA - Four Ball Machine
| |
Machine for determination of wear properties and weld load of
consistent lubricants in a four ball system (rotating ball on three fixed
balls).
| |
Welding load in N, wear scare in mm
| |
DIN 51350
| |
Greases, Pastes, Oils
| |
Get a Quote!
| |
| | | | | | | | | | | | |
| | | | | | | | | | | | |
| | | | | | |
| | | | | | | | | | | | |
|
Density Meter (Pycnometers)
| |
This test method covers the determination of the specific gravity and
density of semi-solid materials by use of a pycnometer.
| |
g/ml
| |
DIN 51 757, ASTM D 70, ISO 3838
| |
Greases, Pastes, Compounds, Oils
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Dropping Point Apparatus
| |
The dropping point is the temperature at which a grease passes from a
semi-solid to a liquid state under the conditions of test.
| |
Dropping point temperature in °C or °F
| |
ASTM D 566, IP 132, ISO 2176, FTM 791-1421
| |
Greases, Pastes, Compounds
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Flow Pressure Apparatus (Kesternich Method)
| |
The flow pressure is the pressure necessary to force a strand of lubricating
grease out of a test nozzle.
| |
Flow pressure in mbar
| |
DIN 51 805
| |
Greases
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Infrared-Analysis Spectrometer (IR)
| |
Infrared spectroscopy is a spectroscopic technique where molecular
vibrations are analyzed. This permits qualitative analysis of lubricants.
| |
IR-Spectra
| |
DIN 51 820 T1
| |
Greases, Pastes, Compounds, Oils
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Oil Bleed and Evaporation Test Assembly
| |
This test method is used to determine the tendency of lubricating
grease to bleed and evaporate oil at an elevated temperature.
| |
Oil bleed and evaporation in weight %
| |
FTM 791-321-2, ASTM D 6184
| |
Greases, Pastes, Compounds
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Oil Separation Test Assembly
| |
The measuring of oil separation from a lubricating grease under the
test conditions, has been shown to provide a useful guide to this behavior on
storage in cans or drums.
| |
Oil separation in weight %
| |
DIN 51 817, IP 121/63
| |
Greases, Pastes, Compounds
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Oxidation Resistance Apparatus (Norma Hoffmann)
| |
This test method determines resistance of lubricating greases to
oxidation when stored statically in an oxygen atmosphere in a sealed system at
an elevated temperature.
| |
Pressure drop in bar
| |
ASTM D 942, DIN 51 808, IP 142, FTM 791-3453, FTM 791-5314
| |
Greases, Pastes, Compounds
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Penetration Apparatus
| |
Penetration serves as a measure of consistency to determine the
plasticity of a wide range of materials.
| |
Cone penetration in 1/10 mm
| |
DIN 51 804 T2, ISO 2137, ASTM D 1403-69
| |
Greases, Pastes, Compounds
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Rotational Viscometer
| |
Determination of apparent dynamic viscosity of lubricating greases by
rotational viscometer - cone and plate system
| |
mPas
| |
DIN 51 810
| |
Greases, Pastes, Compounds
| |
Get a Quote!
| |
| | | | | | | | | | | | |
|
Ubbelohde Viscometer
| |
Determination of the kinematic viscosity of liquid petroleum products,
both transparent and opaque, by measuring the time for a volume of liquid to
flow under gravity through a calibrated glass capillary viscometer.
| |
mm²/s = cSt
| |
ASTM D 445, ASTM D 446, ASTM D 2170, DIN 51 562
| |
Oils
| |
Get a Quote!
| |
| | | | | | | | | | | | |
